Smart Plus (PHT-35LHS)
Technical Manual
VT-TECH-Smart Plus-001
COPYRIGHT© 2018 VATECH.
5) Click the Capture/Recon tab and type the following commands in the command field
and click Send.
Commands Description
[SPM_FISS_0001] Sensor Sensitivity & Binning mode setting
[SPM_FIPM_0001] Sensor Partial mode setting
// Sensor size: 0000~0032
[SPM_FISM_0001] Sensor Internal/External mode setting
//0000: Internal
//0001: External
[SPM_FOVO] Open all 4-axis collimators
[SPM_COLM_0009]
Collimator Position set
//0009: (AL) Close
To Next Page
Loading...
