Vatech Smart Plus PHT-35LHS - Page 70

Smart Plus (PHT-35LHS)
Technical Manual
VT-TECH-Smart Plus-001
68 / 188
COPYRIGHT© 2018 VATECH.
ALL RIGHTS RESERVED
7) Run VACAP.exe.
VAKCAP.exe Path: C:\VCaptureSW\Acquisition\CBCT\WidePano folder
8) Click the Settings tab and double-click Reconstruction. vxm to open.
9) Change the parameters as shown below and save/exit the file.
• POSTPROCESSING = -50 → POSTPROCESSING = 0
• UserCTNumCal = 1 → UserCTNumCal = 0