Vatech Smart Plus PHT-35LHS - Page 87

Smart Plus (PHT-35LHS)
Technical Manual
VT-TECH-Smart Plus-001
85 / 188
COPYRIGHT© 2018 VATECH.
ALL RIGHTS RESERVED
13) Click CBCT tab, type average value in each box for the FOV1 under HIGH RESOLUTION.
Click Save to keep the changes, then click Close.
Do not measure the Metal value and use the fixed value of 2300 for every FOV.
14) Do steps 2) through 14) for other modes as follows:
Count
FOV
Image Quality
Voxel
Gender
Tooth type
100 x 85(FOV.1)
Green
Standard (0.2)
Man
Hard
100 x 70(FOV.2)
High Resolution
Standard (0.2)
Man
Hard
100 x 70(FOV.2)
Green
Standard (0.2)
Man
Hard