iVent201 Operator's Manual
147
The SpO2 Alarm Settings screen
appears.
Figure 4.40 SpO2 Alarms Settings screen.
2. Use the control knob to select
one of the following alarms:
Pulse (heart rate)
SpO2 (SpO
2
level).
3. The top of the slider is
highlighted bright blue. Turn
the control knob to adjust the
alarm upper limit, and press the
control knob for acceptance.
4. The bottom of slider is
highlighted in bright blue. Turn
the control knob to adjust the
alarm lower limit, and press the
control knob for acceptance.
5. Select Accept and press the
control knob.
The SpO2 Alarm Setting screen is
closed, with the alarms settings you
set.
To Next Page
Loading...
