General Operation
124 TVM Series Installation and Operation Handbook
Copyright © 2008, Harris Corporation
2FC AES extended packet, Group 2
2FA AES extended packet, Group 3
FF8 AES extended packet, Group 4
2F0 METADATA packets
1F4 Error detection (EDH)
2F5 Time code
161/101 Closed Caption (EIA-708-B)
161/102 Closed caption (EIA-608 data)
162/101 Program Description DTV
162/102 Data Broadcast (DTV)
162/203 VBI Data
Custom
Custom Data Search
The Custom Data search is used to select a specific Data ID of the ancillary data that
may not be listed in the data search menu. The value is in hexadecimal form.
Data Analyzer Display (TVM-VTM-3GB Option)
NOTE 1: When Data Analyzer is utilized, the unit is forced into Line Select mode.
NOTE 2: Pixel cursor movements are previously described on page 121.
The display characteristics of the DATA ANALYZER will change if the detected
incoming format is either:
• Level A - Direct image format mapping (SMPTE 425M-A) OR
• Level B - 2 x SMPTE 292M HD SDI mapping (SMPTE 425M-B) OR
• The unit is successfully configured for Dual-Link operation.
If one of the conditions listed above is detected, the basic format of the pane will
change and appear as shown in Figure 3-67 for Level A and Figure 3-68 for Level B.
Dual-link display will appear as shown in Figure 3-69.
For Level A and B format, each data Stream contained within the input is represented
as a column.
To Next Page
Loading...