Videotek TVM9100PKG - Alarm Log and Status Pane Menu Selections; Alarm Log Display; Display

General Operation
TVM Series Installation and Operation Handbook 89
Copyright © 2008, Harris Corporation
Use the following NAVIGATION buttons to scroll through the alarm list:
Press to page up through the alarm list.
Press to page down through the alarm list.
Press to select the last page on the list.
Press to select the first page on the list.
Alarm Log and Status Pane Menu Selections
Pressing and holding the ALARM function button in the alarm status pane selects the
pane menu. The Alarm Pane menu is described in Table 3-39.
Table 3-39. Alarm Status Pane Menu
Selection Selection Option
ALARM LOG DISPLAY
ALARM STATUS
ALL
VIDEO ALARMS
AUDIO ALARMS
TIME CODE ALARMS
ALARM LOG DISPLAY
GPI ALARMS
OFF MUTE ALARMS
ON
VIDEO ALARMS ANALOG Press ENT
VIDEO ALARMS DIGITAL Press ENT
AUDIO ALARMS Press ENT
Display
The Display menu selection is used to select between the Alarm Log and Alarm Status
menu.
The Alarm Status screen lists all the alarms, the state of each alarm setting, the current
alarm limit selection (if applicable), and the current alarm duration (if applicable).
Alarm Log Display
The Alarm Log Display menu determines the type of information that is displayed in
the alarm log screen. The selections are:
• All
• Video Alarms