Videotek TVM9100PKG - Blanking (SDI Signals only)

General Operation
TVM Series Installation and Operation Handbook 41
Copyright © 2008, Harris Corporation
Table 3-8. Waveform (SD-SDI) Menu Structure
Selection Selection Option Selection Option
ON If YRGB is selected (Y, R G B)
OFF
CENTER WAVEFORM Press ENT -
WAVEFORM SETUP Press ENT -
Table 3-9. Waveform (3Gb/HD-SDI) Menu Structure
Selection Selection Option Selection Option
FLAT (FLT) -
LOW PASS (LP) -
CHROMA (CHR) -
COMPOSITE FILTER (for
digital formats)
F/LP (FLAT & LOW PASS) -
FLT (FLAT) -
LP (LOW PASS) -
COMPONENT FILTER
BOW (BOWTIE) -
PARADE - PARADE/OVERLAY
OVERLAY -
COMP (COMPOSITE) -
YCBCR -
RGB -
YRGB -
YCBCR + Alpha -
HD FORMAT
RGB + Alpha (TVM-VTM-DLK
only)
-
BLANK ALL -
SHOW EAV/SAV -
BLANKING
SHOW ALL -
If CMPST is selected – Not
Available
-
ON
COMPONENT SEQUENCE
(related to HD FORMAT
selection)
If Y YC
BCR is selected (Y, CB,
C
R)
OFF
ON If RGB is selected (R, G, B)
OFF
ON
If YRGB is selected (Y, R G B)
OFF
CENTER WAVEFORM Press ENT -
WAVEFORM SETUP Press ENT -