General Operation
TVM Series Installation and Operation Handbook 131
Copyright © 2008, Harris Corporation
Table 3-62. Preset Setup Menu
Selection Selection Option Selection Option
NAME PRESET 1 TO 8 RENAME SCREEN
NAME * PRESET *1 TO *7 RENAME SCREEN
CLEAR PRESET 1 TO 8 PRESS ENT
*1 TO *7 PRESS ENT CLEAR * PRESET
ALL PRESS ENT
SETUP PRESS ENT -
Name Preset
The NAME PRESET menu is used to name bank A preset locations using the Rename
screen. On the Rename screen use the RIGHT and LEFT NAVIGATION buttons to
move between character locations, and use the UP and DOWN NAVIGATION buttons
to select a character in the highlighted character location. When complete, press the
RIGHT or LEFT NAVIGATION buttons until ACCEPT or CANCEL is highlighted.
ACCEPT saves the data. CANCEL will not save the data. This is useful for when a
preset is saved to a USB device.
Name * Preset
The NAME * PRESET menu is used to name bank B preset location using the Rename
screen. On the Rename screen use the RIGHT and LEFT NAVIGATION buttons to
move between character locations, and use the UP and DOWN NAVIGATION buttons
to select a character in the highlighted character location. When complete, press the
RIGHT or LEFT NAVIGATION buttons until ACCEPT or CANCEL is highlighted.
ACCEPT saves the data. CANCEL will not save the data. This is useful for when a
preset is saved to a USB device.
Clear Preset
The Clear Preset menu is used to clear the preset and the preset name in bank A. Press
ENT to clear both the preset and CUSTOM name from the memory. Preset *8 cannot
be configured with this menu item.
Clear * Preset
The Clear * Preset menu is used to clear the preset and the preset name in bank B.
Press ENT to clear both the preset and CUSTOM name from the memory. Preset *8
cannot be configured with this menu item.
Setup
Press the ENT button to access the global setup menu. For more information on the
global Setup menu see Section 4.
To Next Page
Loading...