Legend Description
Refresh Parameters To activate / deactivate the parameter refresh function.
The Refresh Parameters function is used to make sure the
parameters in VVSU are equal to the ones used by the
actuator control.
The parameters shown in the VALUE column are now equal to
the ones send to the actuator controller.
In case Start Service value 30 was the last send command to
the actuator, the parameters in the Value column will be equal
to the General web guider defaults.
Options Customize conveyor names. A pop-up window appears in
which an alias name can be entered for each conveyor. The
alias will appear between brackets behind the conveyor name
wherever it appears.
For example, Breaker 1 [first breaker]
Exit Exit the VVSU program. The VVSX server is not shut down.
VVSU OPERATION
Screen layout (generic)
7
THINKING FORWARD
VMI Vision System VVS (OL82) VVSX 13.0.12.0, VVSU 3.0.6 / 4 / 2016-07-11 / pd#175592
7-6
To Next Page
Loading...