VMI VVS OL82 - Page 30

NOTICE
The actual VVSConfig.ini file has additional comment lines.
VVSConfig.ini definitions
No. Legend Description
1 VVSConfig definitions
Defines the conveyors supported by the software.
Number of
Breakers
Defines the number of breakers (usually 2 or 4).
Carcass Defines the number of carcass (usually 1).
Tread Defines the number of tread (usually 1).
2 General definitions
Tip place For breakers only.
● 0: New breaker will be centered depending on previous
measured breaker width.
● 1: New breaker will be centered depending on breaker
width parameter.
INSTALLATION AND CONFIGURATION
Configuration
3
THINKING FORWARD
VMI Vision System VVS (OL82) VVSX 13.0.12.0, VVSU 3.0.6 / 4 / 2016-07-11 / pd#175592
3-12