button Action/result
Using the selection cursor, select the
[Learn in/out actuators/sensors] menu item.
Call up the function with ok.
The central transmitter searches for WMS devices. Then the
following menu is displayed.
NOTE The overview shows all WMS devices that have
already been learned into the network or that were
found for the first time. If the device has already been
learned in, the button is activated for learning out a
device.
Using the selection cursor, select the device that you wish to
learn in.
To check which device is currently selected, press the
button. The selected device waves.
Press the
button.
All product types permitted with the device are displayed.
System
To Next Page
Loading...
