Fig. 121: Install software update on the reader
Once the update of the Masterkey is com-
plete, the menu bar shows which locking
system components (1) the software update
can be installed on.
Readers (2) for which a software update is
available are marked in red in the Cylinder
menu.
1. Call up the Cylinder menu (1).
2. Select reader (2).
There are dierent ways of carrying out the
further installation of the software update on
the reader. Both installation options are
described below. The prerequisites and prep-
aration for the installation of the software
update on the reader apply in both cases.
Install software update on the
reader
Install software updates
23.03.2020 blueCompact electronic locking system 149
To Next Page
Loading...
