Xerox Color 800 User Manual

b) Remove any residual moisture with a dry, lint-free cloth.
4. Return lever 6b to its original position.
5. Use a damp, water-moistened (not wet), lint-free cloth to clean the paper path only
in the green lever jam clearance areas as shown in the illustration.
a) Open each area and clean the surfaces of the green-handle areas.
b) Remove any residual moisture with a dry, lint-free cloth.
6. Return lever 6c to its original position.
7. Return lever 6d to its original position.
8. Grasp handle 6 and gently push in the exit drawer assembly until it stops.
9. Rotate handle 6 in the direction of the arrow to lock the exit drawer assembly in
place.
10. Close the left front door (print engine right side).
Xerox
®
Color 800/1000 Press
9-12
User Guide
Maintenance

Xerox Color 800 Specifications

General

Brand	Xerox
Model	Color 800
Category	Copier
Language	English