Output Format
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128133 User Guide 131
Password
Use this feature to set the password for a job template server.
NOTE: The selection for this feature is displayed only when you have selected
[Network Scanning].
1. Select [Password] on the
[Output Format] screen.
2. Perform the necessary
operations.
3. Select [Save].
For information on keyboard entry,
refer to Keyboard in the Fax/Internet Fax chapter on page 83.
Meta Data
Use this feature to change the value of the Document Management Field (DMF) if it is
set up for the selected job template.
NOTE: The selection for this feature is displayed only when you have selected
[Network Scanning].
To Next Page
Loading...
Need help?
General
