EasyManuals Logo

Xerox CopyCentre 133 User Manual

Xerox CopyCentre 133
364 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #228 background imageLoading...
Page #228 background image
11 Setups
228 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
Reduce/Enlarge Presets
Use this feature to configure or change the reduction/enlargement ratio buttons that
appear when [Preset %] is selected on the [Reduce/Enlarge] screen under the [Scan
Options] tab.
1. Select [Reduce/Enlarge
Presets] on the [Scan Mode
Settings] screen.
2. Use the scroll buttons to switch
between screens.
3. Perform the necessary
operations.
4. Select [Close].
Preset %
Select from preset reduction/enlargement ratios.
Variable %
Specify a reduction/enlargement ratio from 25% to 400% in 1% increments.
Other Settings
Use this feature to configure or change other machine settings specific to the scan
features.
1. Select [Other Settings] on the
[Scan Mode Settings] screen.
2. Use the scroll buttons to switch
between screens.
3. Perform the necessary
operations.
4. Select [Close].
Scan Service
Specify whether to enable the scanner to function.
Memory Full Procedure
If the hard disk becomes full while reading documents, a message asking how to
process the data read up to that point is displayed. You can predefine a processing
method to be performed after the message has been displayed for a specified period.
If you select [Cancel Job], the data will be discarded. If you select [Run Job], the data
read up to that point will be processed.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox CopyCentre 133 and is the answer not in the manual?

Xerox CopyCentre 133 Specifications

General IconGeneral
BrandXerox
ModelCopyCentre 133
CategoryCopier
LanguageEnglish

Related product manuals