Xerox CopyCentre 133 User Manual

4 Fax/Internet Fax
94 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
Communication Mode
Use this feature to select a communication mode for fax transmissions.
1. Select [Communication Mode]
on the [Send Options] screen.
2. Select the required option.
3. Select [Save].
G3 Auto
Select this mode if the remote machine is G3 compatible. This mode is the one usually
selected. The machine automatically switches modes depending on the capabilities of
the remote machine.
F4800
Select this mode when transmitting over noisy or bad telephone lines, for example
when sending international faxes. Can also be useful for transmitting over poor
telephone lines domestically.
G4 Auto
Select this mode when relay broadcasting to Internet Fax destinations.
Priority Send/Delayed Start
These features allow you to set the priority and start time for fax and polling jobs.
Although you can set [Delayed Start] in combination with [Priority Send], a fax will be
sent at the time specified using the [Delayed Start] option.
NOTE: These features are not available for Internet Fax transmissions.
1. Select [Priority Send/Delayed
Start] on the [Send Options]
screen.
2. Perform the necessary
operations.
3. Select [Save].
Priority Send
• Off – Disables the feature.
• On – Sends or polls the job prior to the already stored documents.
Delayed Start
• Off – Disables the feature.

Xerox CopyCentre 133 Specifications

General

Brand	Xerox
Model	CopyCentre 133
Category	Copier
Language	English