EasyManuals Logo

Xerox CopyCentre 133 User Manual

Xerox CopyCentre 133
364 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #192 background imageLoading...
Page #192 background image
11 Setups
192 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
Auto Clear
With this feature enabled, the machine displays the default screen if you do not perform
any operation within the selected period of time. You can select the time period in the
range from 1 to 4 minutes. The time entry field appears only when you select [On].
NTP Time Synchronization
With this feature enabled, the Network Time Protocol (NTP) is used to synchronize the
time of the machine with that of the specified time server.
NOTE: If the time server connection fails, the machine uses its own time without
synchronization.
Connection to Time Server
Specify whether to disable or enable this feature.
Connection Interval
Select the time span for being connected to the specified server, in the range from 1 to
500 hours.
Time Server IP Address
Specify the IP address of the time server using the numeric keypad on the control
panel.
Auto Job Release
With this feature enabled, if a problem such as a paper jam interrupts the current copy
or scan job and is not resolved within the selected period of time, the machine allows
execution of the next job. You can select the time period in the range from 4 to 99
minutes. The time entry field appears only when you select [On].
Auto Print
With this feature enabled, the machine allows execution of print jobs if you do not
perform any operation within the selected period of time. You can select the time period
in the range from 1 to 240 seconds. The time entry field appears only when you select
[On].
Auto Power Saver
The machine provides two types of power saver mode: Low Power and Sleep. When
in the Sleep Mode, the machine saves more power than in the Low Power Mode. The
machine enters the Low Power Mode and when you do not perform any operation
within the selected period of time, the machine automatically switches to the Sleep
Mode. You can select the time period for each mode in the range from 2 to 60 minutes.
You must select a longer time period for the Sleep Mode than for the Low Power Mode.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox CopyCentre 133 and is the answer not in the manual?

Xerox CopyCentre 133 Specifications

General IconGeneral
BrandXerox
ModelCopyCentre 133
CategoryCopier
LanguageEnglish

Related product manuals