EasyManuals Logo

Xerox CopyCentre 133 User Manual

Xerox CopyCentre 133
364 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #310 background imageLoading...
Page #310 background image
15 Maintenance
310 Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide
3. Hold the handle and remove the
cartridge from the machine.
NOTE: Hold the empty cartridge away from you to avoid spilling any toner residue.
Inserting the New Toner Cartridge
1. Remove the new toner cartridge
from the box. Before removing it
from its bag, vigorously shake
the cartridge from side to side.
2. Place the cartridge in position as
shown and slide it into the
machine until it clicks.
3. Close the front cover.
Loading Staples
The finisher contains an automatic stapler. The stapler cartridge contains 5,000
staples. When the machine runs out of the staples, a message is displayed on the
touch screen. When this message is displayed, load a new staple case into the staple
cartridge by following the steps below.
NOTE: Load the correct staple case specified for the product model of the machine.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox CopyCentre 133 and is the answer not in the manual?

Xerox CopyCentre 133 Specifications

General IconGeneral
BrandXerox
ModelCopyCentre 133
CategoryCopier
LanguageEnglish

Related product manuals