Xerox CopyCentre 133 User Manual

Send Options - Fax/Internet Fax
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 93
Preset %
• 100% – Sets the enlargement/reduction ratio to 100% (original size).
• Auto – After scanning the document with original size, automatically selects the
enlargement/reduction ratio depending on the output size of the remote machine.
• Presets – Allows you to select the preset enlarge/reduce settings. Select one of
these to specify the enlargement/reduction ratio. The presets are set up by the Key
Operator.
Variable %
Allows you to specify an enlargement/reduction ratio within the range of 50 to 400%.
Send Options - Fax/Internet Fax
This section describes how to specify the transmission options on the [Send Options]
screen. For information on the features available, refer to the following.
Communication Mode – page 94
Priority Send/Delayed Start – page 94
Send Header – page 96
Cover Note – page 96
Internet Fax Comment (Mail Contents) – page 97
Transmission Report: Read Receipts (MDN) and Delivery Receipts (DSN) – page 98
Recipient Print Sets – page 99
Remote Mailbox – page 100
F Code – page 100
Internet Fax Profile – page 102
1. Press the <All Services> button
on the control panel.
2. Select [Fax/Internet Fax] on the
touch screen.
3. Select the [Send Options] tab.
Use the side tabs to switch
screens.
4. Select the required option.

Xerox CopyCentre 133 Specifications

General

Brand	Xerox
Model	CopyCentre 133
Category	Copier
Language	English