Specifying Destinations
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 83
Group
Locates destinations registered in group codes.
Speed Dial
This feature allows you to select a destination quickly using a 3-digit code assigned to
it. An asterisk (* on the screen keypad or the control panel) can be used to specify
multiple speed dial codes and a pound sign (#) to designate a group code.
For information on how to register speed dial codes, refer to Address Book in the
Setups chapter on page 250.
1. Press the <Speed Dial> button.
2. Enter a 3-digit code.
NOTE: If the 3-digit code entered is
correct, the destination is displayed.
If it is incorrect, you are prompted to
re-enter a 3-digit code.
Keyboard
You can use the screen keyboard to enter text information such as an e-mail address.
Two input modes are available: Alphanumeric and Symbol.
1. Select [Keyboard] on the [Basic
Features] screen.
2. Select the keys on the screen to
enter the required information.
3. Select [Save].
Alphanumeric
Displays number and letter keys on the screen.
Enter this data Results
123 Dials the destination assigned to the speed dial code 123.
12* Dials the speed dial codes 120–129. The asterisk (*) represents all
numbers from 0 to 9.
*** Dials all speed dial codes registered in the machine.
#01 Dials the group code 01. A group code is a speed dial code that can
contain up to 20 destinations and begins with a pound sign (#). Up to
50 group codes can be registered.
<Speed Dial>
button
To Next Page
Loading...
Need help?
General
