Fax Mode Settings
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128/133 User Guide 231
Communication Mode
Sets the default for the [Communication Mode] feature on the [Send Options] screen.
Send Header
Sets the default for the [Send Header] feature on the [Send Options] screen.
Transmission Report
Sets the default for the [Transmission Report] feature on the [Send Options] screen.
Delivery/Read Receipts
Sets the default for the [Delivery Receipts (DSN)] or [Read Receipts (MDN)] feature on
the [Send Options] screen.
NOTE: You can use [Read Receipts (MDN)] only if the remote Internet Fax machine
supports the feature.
Internet Fax Profile
Sets the default for the [Internet Fax Profile] feature on the [Send Options] screen.
NOTE: Although [TIFF-S] can be received by any remote machine supporting Internet
Fax, [TIFF-F] and [TIFF-J] may not be received. When you set to [TIFF-F] or [TIFF-J],
check the capability of the remote machine in advance.
Fax Control
Use this feature to conduct operational control of the various fax features.
The [Fax Control] screen consists of multiple pages.
1. Select [Fax Control] on the [Fax
Mode Settings] screen.
2. Use the scroll buttons to switch
between screens.
3. Perform the necessary
operations.
4. Select [Close].
Send Header - Polling
Sets whether to use the [Send Header] feature when you send documents with the
[Store for Polling] feature on the [On-hook/Others] screen. If you select [On], remark
(“RESEND” or space), start time and date of transmission, sender name, destination
name, G3 ID, and quantity will be added at the top of each page of the document.
To Next Page
Loading...
Need help?
General
