Xerox Phaser 3140

5-28 Phaser 3140/3155/3160 Printer Service Manual
Print-Quality Troubleshooting
Blank Page (1)
The entire image area is blank. Charge voltage from the Power Supply Board to the
Print Cartridge is not available due to damaged or dirty contacts.
Initial Actions
• Check the connection between the Power Supply Board and Print Cartridge.
• Ensure there is no debris on the transfer path.
Troubleshooting Reference Table
Applicable Parts Example Print
■ Print Cartridge, PL1.0.12
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 Clean the contacts on the Print
Cartridge and inside of the printer.
Does the error still occur?
Go to step 2. Complete.
2 Replace Print Cartridge (page 8-6). Complete.
Blank Print
Downloaded From ManualsPrinter.com Manuals