EasyManuals Logo

Xerox Phaser 3140 Service Manual

Xerox Phaser 3140
284 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #78 background imageLoading...
Page #78 background image
3-18 Phaser 3140/3155/3160 Printer Service Manual
Error Messages and Codes
Print Cartridge Errors
Caution
Over exposure to light reduces OPC drum sensitivity. After removal, cover the
Print Cartridge to block light from reaching the OPC Drum.
Print Cartridge At Or Nearing End Of Life
If the Error LED is red (not blinking), the Print Cartridge may have reached its
estimated end of life. Replace the Print Cartridge.
If the Error LED is red and blinking, it may indicate that the estimated end of Print
Cartridge life is approaching. If the printed image is light due to limited toner
remaining, use the following procedure to redistribute the toner to temporarily
improve image quality.
1. Open the Front Cover.
2. Remove the Print Cartridge.
3. Gently shake the Print Cartridge from side to side 5 or 6 times to distribute
toner.
4. Install the Print Cartridge.
5. Close the Front Cover.
6. Cycle printer power to clear the message.
7. If the problem persists, replace the Print Cartridge.
If the problem persists, use the following procedures to troubleshoot the problem.
s3160-102
Downloaded From ManualsPrinter.com Manuals

Table of Contents

Other manuals for Xerox Phaser 3140

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Phaser 3140 and is the answer not in the manual?

Xerox Phaser 3140 Specifications

General IconGeneral
ColorNo
Maximum resolution600 x 1200 DPI
Time to first page (black, normal)10 s
Print speed (black, normal quality, A4/US Letter)18 ppm
Internal memory8 MB
Maximum internal memory- MB
Sound power level (standby)26 dB
Sound pressure level (printing)50 dB
Total input capacity250 sheets
Total output capacity80 sheets
Maximum duty cycle10000 pages per month
Page description languagesGDI
Maximum print size210 x 297 mm
Media weight (tray 1)60 - 163 gsm
Paper tray media typesPlain paper
ISO A-series sizes (A0...A9)A4, A5
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Mac compatibilityYes
Custom media sizes76 x 127 - 216 x 356 mm
Compatible operating systemsWindows 2000/XP/2003, Vista, Mac OS
Power consumption (standby)60 W
Power consumption (printing)360 W
Display-
Operating temperature (T-T)10 - 32 °C
Operating relative humidity (H-H)20 - 80 %
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)360 x 389 x 230 mm

Related product manuals