Xerox Phaser 3140

Phaser 3140/3155/3160 Printer Service Manual 3-25
Error Messages and Codes
4 Inspect and reseat the wiring harness
between Control Panel CN1 and
Controller Board CN8 (CN9 on model
3160).
Is the wiring harness damaged?
Repair the
harness.
If the
problem
persists, go
to step 5.
Go to step 5.
5 Replace the Control Panel (page 8-51).
Does the problem persist?
Replace the
Controller
Board
(page 8-51).
Complete.
Troubleshooting Procedure Table (Continued)
Step Actions and Questions Yes No
Downloaded From ManualsPrinter.com Manuals