Xerox WorkCentre 5021 - Page 134

08/2012
4-32
WorkCentre 5021/5019
REP 9.2.1
Initial Issue
Repairs and Adjustments
Figure 4 j0xh40902
Replacement
1. To install, carry out the removal steps in reverse order.
2. When installing the Tray 1 Retard Pad, attach the spring (x2) to the hole (x2) of the Tray 1
Retard Pad. (Figure 5)
Figure 5 j0lj40908
3. After a replacement, enter the Diag Mode and use [Initialize HFSI Counter] to clear the
HFSI counter.
'Chain Link : 950-803'