08/2012
2-5
WorkCentre 5021/5019
2.1.3
Status Indicator RAPs
Initial Issue
Refer to Chain 6.2 Zone J4 in Chapter 7 BSD.
• REP 4.1.3
Refer to REP 4.1.3 in Chapter 4.
• ADJ 4.1.3
Refer to ADJ 4.1.3 in Chapter 4.
• Replace the parts in sequence
When it is impossible to analyze causes of a problem further, replace the parts in
sequence. The part with a higher replacement frequency or higher possibility of causing a
problem is listed first for replacement.
To Next Page
Loading...
