08/2012
6-88
WorkCentre 5021/5019
6.4.1.3
Initial Issue
General Procedures
Figure 2 j0lj64002
8. Input the Chain-Link Number in the [Chain-Link Number Entry] screen to perform the var-
ious Diagnostics.
6.4.1.3 How to Exit from the CE Diag Mode
CAUTION
Do not leave the machine unattended while it is in the CE Diag Mode.
Procedure
• At the Chain-Link Number Entry, press the [0] key and the [Start] button to exit from the
CE Diag Mode. Exiting from the CE Diag Mode will automatically reboot the machine.
To Next Page
Loading...
