Xerox WorkCentre 5021 - Page 74

08/2012
2-63
WorkCentre 5021/5019
2.2.4.8
Status Indicator RAPs
Initial Issue
YN
Enter DC330[XXX-XXX] and turn the SOL RELEASE ON. Is +24VDC measured
between the NIP/RELEASE SOLENOID pin-2 (+) and the GND (-)?
YN
Replace the NIP/RELEASE SOLENOID.
Check the connection between the PWB pin-6 and the NIP/RELEASE SOLENOID pin-2
for an open circuit and poor contact.
Replace the PWB.