Xilinx Zynq UltraScale+ ZCU216 User Manual

○ USB-to-JTAG Bridge
○ PC4 2x7 2 mm JTAG pod at cable header
• Clocks
○ GTR_REF_CLK_USB3 26 MHz
○ GTR_REF_CLK_SATA 125 MHz
○ CLK104 (various frequencies):
- CLK104_PL_CLK
- CLK104_PL_SYSREF
- CLK104_AMS_SYSREF
- CLK104_DDR_PLY_CAP_SYNC
- CLK104_ADC_REFCLK
- CLK104_DAC_REFCLK
○
8A34001 1588 eCPRI (various frequencies):
- 8A34001_Q1_OUT
- 8A34001_Q2_OUT
- 8A34001_Q3_OUT
- 8A34001_Q7_OUT
- 8A34001_Q8_OUT
- 8A34001_Q11_OUT
○ CLK_100 100 MHz
○ CLK_125 125 MHz
○ PS_REF_CLK 33.33 MHz
○ USER_MGT_SI570 (default 156.25 MHz)
○ USER_SI570_C0 (default 300 MHz)
○ USER_SI570_C1 (default 300 MHz)
○ ADC_CLK_225 (direct connect SMAs)
○ DAC_CLK_229 (direct connect SMAs)
○ USER_MGT_SMA_CLK (series capacitor connected SMAs)
• PS DDR4 4 GB 64-bit SODIMM
• PL DDR4 C0 I/F 2 GB 32-bit Component (4x8-bit)
Chapter 1: Introduction
UG1390 (v1.1) July 10, 2020 www.xilinx.com
ZCU216 Board User Guide 7
Send Feedback

Xilinx Zynq UltraScale+ ZCU216 Specifications

General

Brand	Xilinx
Model	Zynq UltraScale+ ZCU216
Category	Motherboard
Language	English