Need help?Do you have a question about the Xtralis ADPRO FastTrace 2 series and is the answer not in the manual?
General| Brand | Xtralis |
|---|---|
| Model | ADPRO FastTrace 2 series |
| Category | Security System |
| Language | English |
Details the different FastTrace 2 system variants, including Lite, 2X, and 2E models.
Explains the types of system licenses and their requirements for system functionality.
Discusses determining the necessary hard disk space for the system based on configuration.
Step-by-step guide for installing or replacing hard disks in the system.
Explains and guides the setup of RAID 1 mirroring for data redundancy.
Lists the motherboards compatible with the FastTrace 2 system.
Provides essential BIOS settings for different supported motherboards.
Describes various extension boards like HIPI, Ethernet, and I/O cards.
Illustrates possible extension card configurations for different motherboards.
Details the capabilities and possible setups of Main and Extension I/O cards.
Guides the physical installation process for the Main I/O card.
Steps for installing an Extension I/O card.
Details the number of analogue cameras supported by encoder cards.
Technical details for analogue camera inputs and video compression.
Explains network settings and IP range configuration for HIPI cards.
Guides the physical installation of HIPI cards on different motherboards.
Instructions for installing the Ethernet card.
Details network and IP range configuration for the Ethernet connection.
Information on DTC card software and its limitations.
Details serial PTZ camera connection to the Main I/O card.
Covers PTZ control using the DTC coaxial interface.
Details connecting PTZ cameras using USB to serial converters.
Guides audio input setup and lists compatible microphones.
Explains audio output setup and connecting the VM22A audio switch.
Options for connecting PIR detectors to the server.
Describes direct connection of PIR detectors to the Main I/O card.
Details using a USB to RS-485 unit for PIR detector connection.
How to capture and download internal system traces for diagnostics.
How to access and view system reports for status information.
Details the labels found on the device and its packaging.
Breaks down the components of the product number for configuration details.
To Next Page
