Yamaha MT-09 2021 - Page 34

2-7
CHASSIS SPECIFICATIONS
Rear brake
Type Hydraulic single disc brake
Brake disc thickness limit 4.5 mm (0.18 in)
Brake disc runout limit (as measured on
wheel) 0.15 mm (0.0059 in)
Brake pad lining thickness limit 1.0 mm (0.04 in)
Master cylinder inside diameter 12.7 mm (0.50 in)
Caliper cylinder inside diameter 38.18 mm (1.50 in)
Specified brake fluid DOT 4
Front suspension
Shock absorber Hydraulic damper
Fork spring free length limit 268.9 mm (10.59 in)
Inner tube bending limit 0.2 mm (0.01 in)
Recommended oil Yamaha Suspension Oil 01
Quantity (left) 468.0 cm³ (15.82 US oz, 16.51 Imp.oz)
(MTN890)
473.0 cm³ (15.99 US oz, 16.68 Imp.oz)
(MTN890D)
Quantity (right) 472.0 cm³ (15.96 US oz, 16.65 Imp.oz)
(MTN890)
473.0 cm³ (15.99 US oz, 16.68 Imp.oz)
(MTN890D)
Level (left) 107 mm (4.2 in) (MTN890)
110 mm (4.3 in) (MTN890D)
Level (right) 107 mm (4.2 in) (MTN890)
110 mm (4.3 in) (MTN890D)
Spring preload
Adjustment value (Soft) 19.0 mm (0.75 in)
Adjustment value (STD) 15.0 mm (0.59 in)
Adjustment value (Hard) 4.0 mm (0.16 in)
Rebound damping
Unit for adjustment Click
Adjustment value from the start position
(Soft) 11 (MTN890)
26 (MTN890D)
Adjustment value from the start position
(STD) 15 (MTN890D)
6 (MTN890)
Adjustment value from the start position
(Hard) 1
Compression damping
Unit for compression damping adjustment Click (MTN890)
Adjustment value from the start position
(Soft) 11 (MTN890)
Adjustment value from the start position
(STD) 6 (MTN890)
Adjustment value from the start position
(Hard) 1 (MTN890)