2-10
ELECTRICAL SPECIFICATIONS
EAS20016
ELECTRICAL SPECIFICATIONS
Voltage
System voltage 12 V
Ignition system
Ignition timing (B.T.D.C.) 3.0–7.0 °/1300 r/min
Engine control unit
Model TBDF3W (MTN890)
TBDF5R (MTN890D)
Ignition coil
Primary coil resistance 1.19–1.61 Ω
Secondary coil resistance 8.50–11.50 kΩ
Charging system
Charging system AC magneto
Standard output 14.0 V, 29.6 A at 5000 r/min
Stator coil resistance 0.152–0.228 Ω
Rectifier/regulator
Regulated voltage (DC) 14.3–14.7 V
Battery
Model YTZ10S
Voltage, capacity 12 V, 8.6 Ah (10 HR)
Bulb wattage
Headlight LED
Brake/tail light LED
Front turn signal light LED
Rear turn signal light LED
Auxiliary light LED
License plate light 5.0 W
Meter lighting LED
Indicator light
Neutral indicator light LED
Stability control indicator light LED
Oil pressure and Coolant temperature warning
light LED
High beam indicator light LED
Turn signal indicator light LED
Fuel level warning light LED
Malfunction indicator light LED
Cruise control “SET” indicator light LED (MTN890D)
Cruise control “ON” indicator light LED (MTN890D)
Auxiliary system warning light LED
ABS warning light LED
Immobilizer system indicator light LED
To Next Page
Loading...
