EasyManua.ls Logo

Yamaha MT-09 2021 - Page 498

Yamaha MT-09 2021
752 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9-68
SELF-DIAGNOSTIC FUNCTION AND DIAGNOSTIC CODE TABLE
P1602 Malfunction in ECU
internal circuit (mal-
function of ECU
power cut-off func-
tion).
Open or short cir-
cuit in wire har-
ness between
ECU and battery.
Open or short cir-
cuit in wire har-
ness between
ECU and main
switch.
Blown backup
fuse.
Malfunction in
ECU.
Engine idling speed
is unstable.
Engine idling speed
is high.
Increased exhaust
emissions.
Engine is difficult to
start.
O
2
feedback learn-
ing is not carried
out.
O
2
feedback learn-
ing value is not writ-
ten.
Cruise control sys-
tem cannot be oper-
ated. (for
MTN890D)
P1606
P1607
P1608
[P1606] Intake air
pressure sensor 2:
ground short circuit
detected.
[P1607] Intake air
pressure sensor 2:
open or power short
circuit detected.
[P1608] Intake air
pressure sensor 2:
signal out of range.
Defective coupler
between intake air
pressure sensor 2
and ECU.
Open or short cir-
cuit in wire har-
ness between
intake air pressure
sensor 2 and ECU.
Improperly in-
stalled intake air
pressure sensor 2.
Defective intake
air pressure sen-
sor 2.
Malfunction in
ECU.
Engine is difficult to
start.
Increased exhaust
emissions.
Insufficient power at
high altitudes.
Engine idling speed
is unstable.
α–N is fixed.
Intake air pressure
difference is fixed to
0 [kPa].
Atmospheric pres-
sure is fixed to
101.3 [kPa].
Fuel is not cut off
due to the intake air
pressure difference.
O
2
feedback is not
carried out.
ISC feedback is not
carried out.
ISC learning is not
carried out.
P1609 Intake air pressure
sensor 2: clogging
of hose or sensor
disconnection
Intake air pressure
sensor 2 hose is
not installed.
Intake air pressure
sensor 2 hose is
not installed cor-
rectly (Detached,
clogged, kinked or
pinching).
Intake air pressure
sensor 2 hole is
clogged, or intake
air pressure sen-
sor is not installed
correctly.
Engine idling speed
is high.
Engine idling speed
is unstable.
Loss of engine pow-
er.
Intake air pressure
difference is fixed to
0 [kPa].
α–N is fixed.
Fuel is not cut off
due to the intake air
pressure difference.
Atmospheric pres-
sure is fixed to
101.3 [kPa].
O
2
feedback is not
carried out.
DTC Item
Probable cause of
malfunction
Vehicle symptom
Fail-safe system
operation

Table of Contents

Related product manuals