9-79
SELF-DIAGNOSTIC FUNCTION AND DIAGNOSTIC CODE TABLE
67 ISC (Idle Speed Control)
learning condition display
ISC (Idle Speed Control)
learning data erasure
00
ISC (Idle Speed Control)
learning data has been
erased.
01
It is not necessary to erase
the ISC (Idle Speed Con-
trol) learning data.
02
It is necessary to erase the
ISC (Idle Speed Control)
learning data.
To erase the ISC (Idle
Speed Control) learning
data, push the “Operation”
button 3 times in 5 sec-
onds.
70 Control number 0–254 [-] —
80 Cruise control setting
switch “RES+”
Push and release the
“RES+” side of the cruise
control setting switch.
• Switch is pushed ON
• Switch is released OFF
81 Cruise control setting
switch “SET-”
Push and release the
“SET-” side of the cruise
control setting switch.
• Switch is pushed ON
• Switch is released OFF
82 Cruise control cancel cir-
cuit
Operate the clutch lever,
brake lever, brake pedal,
and throttle grip.
• Clutch lever is squeezed ON
• Clutch lever is released OFF
• Brake lever is squeezed ON
• Brake lever is released OFF
• Brake pedal is depressed ON
• Brake pedal is released OFF
• Throttle grip is turned
past the closed position
in the deceleration direc-
tion
ON
• Throttle grip is released OFF
83 Front brake light switch
and rear brake light switch
Operate the brake lever
and brake pedal.
• Brake lever is squeezed ON
• Brake lever is released OFF
• Brake pedal is depressed ON
• Brake pedal is released OFF
Diagnostic
code No.
Item Tool display Procedure
To Next Page
Loading...
