9-149
P0300, P0301, P0302, P0303
Reproduction test condition
3. Connect the YDT and check if the pending DTC is displayed.
A. Speed [km/h]
B. Time [min]
C. Vehicle speed of FFD
D. Start the engine
E. Steady driving time
F. Stop the engine
Conversion table of steady driving time
Engine speed (r/min) Time (sec.)
2000 240
3000 160
4000 120
5000 96
6000 80
7000 70
8000 60
9000 54
10000 48
Is the pending DTC displayed?
Yes
→ Delete the pending DTC, then go to step 4.
No
→ Confirm the engine speed, vehicle speed and gear position to the customer when the customer
feels an abnormality.
Go to step 2.
If the pending DTC is not displayed after several reproduction test, go to step 4.
To Next Page