2-62
CABLE ROUTING
1. Radiator hose (cylinder head to radiator)
A. Insert the radiator hose (cylinder head to
radiator) to the root of the radiator properly.
B. 0–2 mm (0–0.08 in)
C. Front side of the vehicle
D. Right side of the vehicle
E. Install the clip with its end facing the rear.
F. 3 mm (0.12 in) or more
G. Make sure not to install the hose clip on the
raised portion of the hose fitting.
H. Hose plug-in section
I. Hose clip fixed position details.
To Next Page
Loading...
