2-66
CABLE ROUTING
1. Water pump inlet hose
2. Water pump assembly
3. Radiator outlet hose
4. Radiator
A. Align the white paint mark on the water pump
inlet hose with the rib on the water pump and
insert until the hose stops.
B. Hose clamp fixed position details.
C. 3 mm (0.12 in) or more
D. 0–1 mm (0–0.04 in)
E. Hose plug-in section
F. Make sure not to install the hose clamp on
the raised portion of the hose fitting.
To Next Page
Loading...
