Yamaha MT-09 2021 - Page 98

3-2
PERIODIC MAINTENANCE
6 * Brake hoses
• Check for cracks or damage. √√√√√
• Replace. Every 4 years
7 * Brake fluid • Change. Every 2 years
8 * Wheels
• Check runout and for damage.
• Replace if necessary.
√√√√
9 * Tires
• Check tread depth and for
damage.
• Replace if necessary.
• Check air pressure.
• Correct if necessary.
√√√√√
10 * Wheel bearings
• Check bearing for looseness
or damage.
√√√√
11 *
Swingarm pivot
bearings
• Check operation and for ex-
cessive play.
√√√√
• Lubricate with lithium-soap-
based grease.
Every 50000 km (30000 mi)
12 Drive chain
• Check chain slack, alignment
and condition.
• Adjust and lubricate chain with
a special O-ring chain lubri-
cant thoroughly.
Every 1000 km (600 mi) and after washing the motorcycle, riding in the
rain or riding in wet areas
13 * Steering bearings
• Check bearing assemblies for
looseness.
√√ √
• Moderately repack with lithi-
um-soap-based grease.
√√
14 * Chassis fasteners
• Make sure that all nuts, bolts
and screws are properly tight-
ened.
√√√√√
15
Brake lever pivot
shaft
• Lubricate with silicone grease. √√√√√
16
Brake pedal pivot
shaft
• Lubricate with lithium-soap-
based grease.
√√√√√
17
Clutch lever pivot
shaft
• Lubricate with lithium-soap-
based grease.
√√√√√
18
Shift pedal pivot
shaft
• Lubricate with lithium-soap-
based grease.
√√√√√
19 Sidestand
• Check operation.
• Lubricate with molybdenum
disulfide grease.
√√√√√
20 * Sidestand switch
• Check operation and replace
if necessary.
√√√√√√
21 * Front fork
• Check operation and for oil
leakage.
•
Replace if necessary.
√√√√
22 *
Shock absorber
assembly
• Check operation and for oil
leakage.
• Replace if necessary.
√√√√
23 *
Rear suspension
relay arm and
connecting arm
pivoting points
• Check operation. √√√√
24 Engine oil
• Change (warm engine before
draining).
• Check oil level and vehicle for
oil leakage.
√√√√√√
25
Engine oil filter
cartridge
• Replace. √√√
26 * Cooling system
• Check coolant level and vehi-
cle for coolant leakage.
√√√√√
• Change. Every 3 years
27 *
Front and rear
brake switches
• Check operation. √√√√√√
No. ITEM
CHECK OR MAINTENANCE
JOB
ODOMETER READING
ANNUAL
CHECK1000 km
(600 mi)
10000 km
(6000 mi)
20000 km
(12000 mi)
30000 km
(18000 mi)
40000 km
(24000 mi)