EasyManuals Logo

YASKAWA SGDM User Manual

YASKAWA SGDM
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
xii
Disposal
General Precautions
• When disposing of the products, treat them as ordinary industrial waste.
Note the following to ensure safe application.
• The drawings presented in this manual are sometimes shown without covers or protective guards. Always replace
the cover or protective guard as specified first, and then operate the products in accordance with the manual.
• The drawings presented in this manual are typical examples and may not match the product you received.
• This manual is subject to change due to product improvement, specification modification, and manual
improvement. When this manual is revised, the manual code is updated and the new manual is published as a next
edition.
• If the manual must be ordered due to loss or damage, inform your nearest Yaskawa representative or one of the
offices listed on the back of this manual.
• Yaskawa will not take responsibility for the results of unauthorized modifications of this product. Yaskawa shall
not be liable for any damages or troubles resulting from unauthorized modification.
CAUTION

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the YASKAWA SGDM and is the answer not in the manual?

YASKAWA SGDM Specifications

General IconGeneral
Communication InterfaceMECHATROLINK-II, MECHATROLINK-III, EtherCAT
FeedbackIncremental encoder, Absolute encoder
Protection FeaturesOvercurrent, Overvoltage, Overload, Overheat
Ambient Temperature0°C to 55°C
Storage Temperature-20 to +85°C (-4 to 185°F)
Vibration5.9 m/s2 (0.6 G) at 10 to 55 Hz

Related product manuals