App-54
IM AQ6370D-01EN
TRACE (MORE 1/2)
3
4
5
6
1
2
7
7
7
8
7-1
7-1
7-1
7-2
7-4
7-5
7-6
7-2
7-2
7-3
1 Active trace setting (5.11, 6.2 to 6.7, 7.8, 7.9)
2 Show/hide active trace setting (5.11, 6.2 to 6.7, 7.8, 7.9)
3 Setting write mode on the active trace (5.11, 6.2, 7.8, 7.9)
4 Setting fixed mode on the active trace (6.2, 7.8, 7.9)
5 Setting MAX/MIN hold mode on the active trace (6.3)
6 Active trace sweep average setting(6.4)
7 Trace-to-trace calculation settings (trace C, F, G only) (6.5 to 6.7, 7.9)
7-1 LOG based between-trace calculation (6.5, 7.9)
7-2 LIN based between-trace calculation (6.5)
7-3 Power density display (trace F only) (6.5, 6.8)
7-4 Trace normalization (trace G only) (6.5, 6.6)
7-5 Trace curve fitting (trace G only) (6.5, 6.7)
7-6 Trace peak curve fitting (trace G only) (6.5, 6.7)
8 Trace conditions list display (6.12)
Appendix 7 Soft Key Tree Diagram
To Next Page
Loading...
Need help?
General
