YOKOGAWA AQ6370D - 7.14 Correcting Displayed Values

7-57
IM AQ6370D-01EN
Analysis
1
2
3
4
5
6
7
8
9
10
11
App
Index
7.14 Correcting Displayed Values
Procedure
Setting the Wavelength Shift Amount
1.
Press SYSTEM.
2.
Press the WL SHIFT soft key. The wavelength shift setting screen is displayed.
3.
Enter a wavelength shift amount using the rotary knob, arrow keys, or numeric
key pad.
4.
Press ENTER.
Setting the Level Shift Amount
1.
Press SYSTEM.
2.
Press the LEVEL SHIFT soft key. The level shift setting screen is displayed.
3.
Enter a level shift amount using the rotary knob, arrow keys, or numeric key pad.
4.
Press ENTER.
Note
After entering the wavelength or level shift amount, the setting is applied to the displayed
values upon the next measurement.