10-4
IM AQ6370D-01EN
10.2 Mechanical Inspection
WARNING
When performing inspection, turn OFF the MAIN POWER switch on the rear panel
and remove the power cable.
CAUTION
• If any foreign particles become trapped in the various connectors, malfunction or
damage can result.
• If any of the various types of connectors do not fit snugly, the instrument may not
operate normally.
• If any abnormalities occur, please contact your nearest Yokogawa
representative.
Check the following:
• That the instrument’s exterior is not damaged or deformed.
• That all switches, connectors, and other assembled parts are not loose.
• That switches can be operated smoothly.
To Next Page
Loading...
