10-3
IM AQ6370D-01EN
Maintenance
10
Reading the Firmware from a PC
1.
Press SYSTEM. A system setup menu appears.
2.
Press the MORE soft key repeatedly until the MORE 4/4 menu is displayed.
3.
Press the VERSION soft key. The firmware version is displayed.
4.
Press the UPDATE(NETWORK) soft key. The “Insert Update Files (NETWORK)”
message appears.
5.
Connect the PC containing the update firmware to the AQ6370D over a network.
6.
Use a file management software on the PC to copy the update software (.upd
extension) to the UPDATE directory of the AQ6370D internal memory.
7.
For the remaining of the procedure, follow the steps from step 6 in “Reading the
Firmware from a USB Memory Device.”
Note
When you update the firmware, the setup data will be initialized.
If necessary, save the setup data. For the operating procedure, see section 8.5.
10.1 Upgrading the Firmware
To Next Page
Loading...
Need help?
General
