8-56
IM AQ6370D-01EN
8.10 Saving and Loading Logging Data
Procedure
You can save and load logging data and the corresponding trace waveforms.
CAUTION
Do not remove the USB storage medium or turn off the power when the USB
storage media access indicator is blinking.
Doing so may damage the USB storage medium or corrupt its data.
Before you remove a USB storage medium, be sure to follow the procedure in
section 8.1 to make the USB storage medium ready to be removed.
Selecting the Method of Automatically Setting the File Name
Select the method of automatically setting the file name by referring to page 8-6.
Setting the Type of File to Save to LOGGING
1.
Press FILE.
2.
Press the ITEM SELECT soft key. The soft key menu changes.
3.
Press the MORE 1/2 soft key.
4.
Press the LOGGING soft key. LOGGING is selected, and the menu returns to the
FILE level.
5.
Press the WRITE soft key. A file list appears.
To Next Page
Loading...
Need help?
General
