8-1
IM AQ6370D-01EN
Saving/Loading Data
8
8.1 USB Storage Media
Supported USB Storage Media
The instrument supports USB 1.0 or USB 2.0 compliant USB memory devices or hard
disks. For details, contact your nearest Yokogawa representative.
Removing USB Storage Media
Always follow the procedure below when removing USB storage media.
1.
Press FILE. The file menu is displayed.
Check whether the REMOVE USB STORAGE soft key is enabled or disabled
(dimmed). If the REMOVE USB STORAGE soft key is disabled (dimmed), the
USB storage media can be safely removed.
2.
If the REMOVE USB STORAGE soft key is enabled, press the REMOVE USB
STORAGE soft key. If the REMOVE USB STORAGE soft key is disabled (dimmed),
the USB storage media can be safely removed.
For other precautions, please read the user's manual of your USB memory device.
Note
• If there are 2 or more USB storage devices, only the first connected device is recognized. If
you restart the instrument, it the USB storage devices that were connected afterward will be
recognized.
• Please refer to your USB memory's user's manual for additional precautions.
Chapter 8 Saving/Loading Data
To Next Page
Loading...
Need help?
General
