Appendix I
ZCast Design Guide - 29
12 Conclusion
With the information in this document, the design and pouring of your prototype metal parts is
only a step away. If you or your foundry has questions about any of the information contained
herein, or need additional information, please contact us:
North America:
Howard Rhett
North American Sales Engineer (ZCast)
Z Corporation
20 North Avenue
Burlington, MA 01803
1 781 852 5005 phone
hrhett@zcorp.com
International:
Ben Sweet-Block
International Sales Engineer
Z Corporation
20 North Avenue
Burlington, MA 01803
+1 781 852 5027 phone
bsweet@zcorp.com
To Next Page
Loading...
