14 service@zcorp.com
THIS CHAPTER PROVIDES AN OVERVIEW OF THE
SET-UP, PART REMOVAL, AND PART POST-
PROCESSING STEPS REQUIRED TO PRINT A PART.
FOR A DETAILED STEP-BY-STEP GUIDE TO
PRINTER SET-UP, PLEASE REFER TO CHAPTER
4; USING ZPRINT SOFTWARE IN CHAPTER 5;
PART REMOVAL AND POST PROCESSING IS
COVERED IN CHAPTER 6.
FOR ADDITIONAL INFORMATION ON POST-
PROCESSING TECHNIQUES, REVIEW CHAPTER
7, APPLICATIONS OR VISIT THE Z CORP. USER
WEBSITE AT WWW.ZCORP-USERS.COM.
QUICK START
GUIDE
CHAPTER 2
To Next Page
Loading...
