45www.zcorp-users.com
THIS CHAPTER WILL EXPLAIN HOW TO SET UP
THE BUILD, CHECK THE 3D PRINT SETTINGS,
AND PRINT. FOR MORE INFORMATION ABOUT
THE FEATURES IN THE ZPRINT SOFTWARE,
PLEASE REFER TO THE ZPRINT SOFTWARE
MANUAL.
FOR INFORMATION AND GUIDANCE ON SOFT-
WARE FEATURES, PLEASE CONTACT THE Z
CORPORATION SERVICE DEPARTMENT AT
(781) 852-5050, TOLL-FREE AT (877) 88-
ZCORP OR VIA EMAIL AT
SERVICE@ZCORP.COM.
USING ZPRINT
SOFTWARE
CHAPTER 5
To Next Page
Loading...
