THIS CHAPTER COVERS ROUTINE
MAINTENANCE STEPS AND PROCEDURES THAT
ARE RECOMMENDED TO KEEP THE ZPRINTER
310 OPERATING IN OPTIMAL CONDITION. IT
INCLUDES PROCEDURES ON CHANGING THE
PRINT HEAD, OILING THE FAST AXIS, FILLING
THE WASH FLUID RESERVOIR, AND GREASING
THE SLOW AXIS AND PISTON SCREWS. IT WILL
ALSO EXPLAIN THE PROCESS OF CHANGING
BINDER FLUID, AND BLEEDING AIR FROM THE
FLUID SYSTEM.
FOR INFORMATION AND GUIDANCE ON
ADDITIONAL MAINTENANCE STEPS, PLEASE
CONTACT THE Z CORPORATION SERVICE
DEPARTMENT AT (781) 852-5050, TOLL-
FREE AT (877) 88-ZCORP OR VIA EMAIL
AT SERVICE@ZCORP.COM.
MAINTENANCE
CHAPTER 8
To Next Page
Loading...
