34 service@zcorp.com
THIS CHAPTER IS A STEP-BY-STEP GUIDE ON
PREPARING THE 3D PRINTER FOR PRINTING.
IT COVERS PREPARING THE BUILD AREA,
CLEANING THE SERVICE STATION, FILLING THE
BINDER BOTTLE, AND REMOVING THE WASTE
BOTTLE.
FOR ADDITIONAL ASSISTANCE AND INFORMA-
TION, PLEASE CONTACT THE Z CORPORATION
SERVICE DEPARTMENT AT (781) 852-5050,
TOLL-FREE AT (877) 88-ZCORP OR VIA
EMAIL AT SERVICE@ZCORP.COM. YOU MAY
ALSO VISIT THE Z CORP. USER GROUP
WEBSITE AT WWW.ZCORP-USERS.COM
PREPARING THE
3D PRINTER
CHAPTER 4
To Next Page
Loading...
